Simpson truss software

A good designer running the software is necessary and there is lots of training available. MiTek has more than 50 training modules for the beginner through to the seasoned pro. Truss fabrication design teams either have a professional engineer on the team or access to engineering advice. A well-rounded design team can create the design look wanted, with trusses that exceed building code requirements, at a competitive price.

The software provides integrated project management as well as truss, wall panel, and EWP design tools for an industry that demands quick, economic, high-quality results. Naturally, the roof and truss design must be integrated into the rest of the online design.

And with continued advances in wood science and the creation of new and better engineered wood products for beams, columns and panels, the options for wood building solutions continue to expand and evolve. The Canadian truss industry has established quality and production standards for truss manufacturing.

This group ensures that science remains the guiding principle to wood solutions. Evidently, software will remain a huge part of the construction solution moving forward. Our task in the structural wood industry is to build, and with the aid of software, the opportunities are endless.

OSWA represents manufacturers, suppliers, engineers and designers in the Ontario structural wood industry. For more information, visit www. Your email address will not be published. Save my name, email, and website in this browser for the next time I comment.

Join Us Close. Are you an Engineering professional? Join Eng-Tips Forums! Join Us! By joining you are opting in to receive e-mail. Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here. Related Projects. Hello all, I am new to this forum and I am a manufacturer and builder of various building products. As a builder in Florida we are having an extremely difficult time acquiring trusses. I have projects currently on hold as trusses have been delayed by months and it does not look to be getting better. I am looking to construct trusses in my facility using plywood gussets in place of press in metal plates.

I am looking to do this on both a short term basis to get me back on track for my delayed projects and a longer term basis to help with other home builders in the same position until things go back to "normal" lead times. I have read some studies, although they were conducted in the mid 90's that shows plywood with adhesive is a strong alternative to metal press in plates.

Am I on the right path here as I can't seem to find a structural engineer to want to help with this? I understand that purchasing pre-engineered trusses would be easier, but that is not an option right now. Please let me know if I am way off basis with wanting to construct trusses using plywood plates or if it is a viable option.

Many thanks. There were also several studies done further back into the 's. It can be done. The issue is that it's very unlikely that you'll get them to span as far as modern truss assembly methods. You also need a structural engineer to sign off on it. If you can't find one, don't build these. They'll fall under the section of the code that requires engineering, so the people you sell them to will be in trouble when the inspector comes out. Probably be easier and cheaper to just design the houses as stick framed - even with the added expense of LVL's or steel beams.

I know he went down the path of designing these. Anybody can design a plywood-gusseted truss. It's the product liability that everyone avoids. Thank you for the responses thus far. I have been in contact with Simpson Strong-tie and it looks like I will be setting up a truss plant using standard press-in truss plates. This is how bad it's gotten here in Florida for us to acquire certain products.

It would still be my preference to use plywood plates but, as some have noted it seems to be the liability. I don't understand why as I manufacture unique products which are engineered for me I have a pre-fab steel and concrete panel and I am also involved in a 3D concrete printer operation.

I carry a large liability policy and would have thought that the insurances would go through the chain of command. So long as the engineer designed it right, if any failure occurred because of my fabrication it would fall on my liability??? Trusses have become so difficult to obtain for smaller builders like myself 5 - 10 homes a year as they are only catering to the national builders that it warrants me setting up a small plant to service my business piers that have companies about my size.

Thanks for the recommendations. My former boss now retired used to design these. But as I recall they had a boat load of nails in them. I remember that the nail heads nearly touched each other. There used to be a lot of these used in Ag buildings pole barns. The other option are perforated metal nailing plates. Finding sealed plans for either may be a stretch these days. Visit our updated privacy and cookie policy to learn more.

This Website Uses Cookies By closing this message or continuing to use our site, you agree to our cookie policy. Learn More This website requires certain cookies to work and uses other cookies to help you have the best experience.

January 16, Report Abusive Comment Thank you for helping us to improve our forums. Is this comment offensive?