Windows scheduled tasks error code 0x1

To find the issue you will need to troubleshoot some solutions. We will try to present and explain some of the common solutions about return code 0x1. If you are trying to run the script or batch in map drive instead of specifying the latter try to use the full UNC path. For example:. Especially on scripts and batches windows has the problem to understand paths with spaces if they are not quoted. Try to use quotes on paths with spaces on task schedule configuration or on scripts and batches.

For example, add one line to write the current time. Above we included almost all solutions and troubleshooting regarding the task scheduler 0x1 error code. Error 0x1 his hard to debug and need to try a couple of solutions in order to find the reason for your environment.

Task Scheduler 0x1. UNC path. Configure path on start in. I solved my problem thanks to your article. Your email address will not be published. Skip to content Others. Another task scheduled at a later stage picks the created. When I run the script manually as Admin with Powershell, it works fine in both cases, but when attached to the Task Scheduler task, it comes up with the 0x1 error.

Just FYI, cant explain it. Don't know why, but I re-wrote my scripts that were failing, from scratch The problem went away. Initially the batch files would run manually no problem but would consistently fail through the task scheduler.

Out of frustration, I deleted them and re-wrote Go Figure I deleted the old ones so I can not go back and compare. Obviously something was wrong but I could never find it.

I m facing the same problem in Windows 8. In my case i m invoking the task from System account where the folder where the batch script resides has full control of System account. On the General tab, Check the last drop down and make sure it is pointing to correct OS. In my case , it was default set to Windows Vista ,Windows and my server was windows R2.

Once i changed it to Windows R2 , it just worked fine with whether or not user logged in option. Hope that helps! There are three important options to make sure your task will run: 1 - Create your task using the "Create Task" option instead of the "Create Basic Task" this gives you more options for the server type, usually the default server will work - Windows Server , Windows XP, or Windows You can map drives on your computer, but you must use the UNC paths throughout your task.

These options should work if you select to run the task when the user is logged on or not. Place a pause at the end of your batch file so you can see any errors and test run the job. You do not have to sign in, just start the session. I tried everything that everyone suggested, but the only thing that I got to work was to put a command in the batch file to output a directory listing. This makes absolutely no sense at all; however, it was the only way that I could get the batch file to run without any problems.

Creating a 'New Task' rather than a 'Basic Task' gives you a Windows 7 option in the server type which is what I needed in my case. I also put the path without quotes into the 'Start In' box and ticked the 'Run with Highest Privileges' box. I must say it was rather nice to figure out that 0x1 could mean that the batch file couldn't be found. Meanwhile, I was able to run the batch file outside of TS without any problems.

Tip: If TS isn't running the batch file as schedule, try running it via the 'Run' command within TS, either via the right click menu or the option on the right hand side panel. I changed it from Windows vista to windows xp which worked for me :. I had this issue. How I resolved it was to explicitly state all paths used in the.

I know this issue could be very old but I have had this problem for years using WinSCP and everything I tried I still got the error until I realized just now that this was because there was an error in the script file that is used to run WinSCP. Most of the 0x1 error cases that I found are from the path errors. So always use a full path in your. One more important note is you'll need to add your path of the. See this tutorial video:.

I noticed another PowerShell script which another Admin had set-up successfully. Once I set mine up the same way, it worked:. The path originally came from another machine running a similar scheduled task.

Kept getting 0x1 on the new machine. So I just re-typed the space character in the dialog box and it worked fine. I have setup task scheduler jobs on a server where my login belong to administrators group on the server. All the jobs created run. These jobs are setup to run every minute. I get 0x1 error when I set it up to run under my login but runs fine when I set it up to run under Administrators group, as long as only I am logged in or no one from Administrators group are logged in.

The Administrators group includes many other users. The trouble starts if anyone from Administrators group logs in because all task scheduler jobs starts running under their logins and fail because of the privileges. I have tested every possible solution suggested above and nothing has worked.

Would appreciate if any one knows a solution to this. This seems to have worked for me. The message did not refresh in the Task Scheduler even after I changed the settings and reran the job manually a few times. When executing a Powershell script through Task Manager or running a task with sqlps which is essentially the same thing , I've discovered that in order to prevent the task from ending with 0x1 return code, once needs to add -querytimeout 0 to the task action arguments.

It has to do with Task Scheduler and tasks that are taking a longer time to execute for example a minute or more.

We are both trying to do the same thing with WinSCP. The problem that I found was that the Administrator accounts, both Domain and Local, are not allowed to be the "Run As" account in Scheduled Tasks anymore. It seems that CMD. Also, set the Scheduled Task to "Run with highest privileges".

General tab of the task properties. In the "Start in optional :" box, make sure the local path or full UNC path if not local for the folder containing your batch file is entered there. It's not optional! If your path has spaces in folder names, you will have to change the folder names or move the batch file because the "Start in optional :" box can NOT have quotations.

Also, make sure that the path to the batch file has Security Rights setup for the Service account that you create. Then consider the action of your task In the Action section of the task, specify the script folder in Start in optional parameter. The job runs fine but I get 0x1 instead of 0x0. I had a PowerShell script setup to update godaddy dns when my ip changed on a windows 10 machine. Worked fine, then I decided it would be better to run that on the mailserver itself since it was always going to be on, and was the machine that really needed dns to be correct.

I exported the two tasks, and imported them into the mailserver. I edited the task to update paths and got "incorrect function" error or 0x1 depending on its mood apparently. I tried creating the task from scratch, same error.

Specifically used PowerShell to avoid any batch file issues, and running the script from PowerShell worked as expected. Tried changing user, logged in or not, and finally gave up and went back to Windows Took another look at it today and tried all the stuff here, the fix was to remove the Start-in entry and prepend it to the Add Arguments field. That fixed it. Apparently Windows 10 doesn't mind if you use the Start-in box, Windows Server does care.

To me it makes more sense to actually support the option "Start-in" if you are going to show it. Why can't they keep things consistent across operating systems? I would think it would be easier for all involved, or am I missing something? I've been using Task Schedular on one of the servers for running scripts for many years and have never filled in the Start In field- the tasks were working fine.